How It Works

1
Plan your route
Sketch your design on the wall (pencil works). Mark a clip every 30 cm on straight runs, plus one at every bend.
2
Clean the surface
Wipe each spot with a dry cloth or rubbing alcohol. Adhesive holds best on smooth, clean, dry surfaces.
3
Stick + press
Peel the backing off one clip at a time, press onto your mark, hold for 3 seconds. Move on to the next.
4
Snap in the rope
Once all clips are placed, snap the Neon Rope Light 2 into each clip following your shape.

Is This Right for Me?

Compatibility: Govee Neon Rope Light 2 (H61D3, H61D4, H61D5)
Mounting type: Adhesive (peel-and-stick)
Material: High-impact plastic
Suitable surface: Walls, ceilings, tiles (smooth + dry)
Indoor / outdoor: Indoor primarily - adhesive less reliable outdoors
Color: Clear / translucent

Product Details

Govee Neon Rope Light Clips 

These Govee neon rope light clips are perfect for decorating any smooth surface, like walls, ceilings, or tiles. They work with Govee neon rope light models H61D3 , H61D4 and H61D5 only.

Super Easy to Use!
Installing is a breeze! Just peel off the sticker on the back, stick the clip where you want it, and press for 3 seconds. This makes sure it sticks really well!

Strong and Long-Lasting!
These clips are made from high-quality plastic, which means they won’t rust or get dusty easily. They’re also lighter and tougher than metal clips, so they won’t bend or break easily. Plus, they have smooth edges to keep you safe.

 These clips will help you make your room look awesome with colorful lights!

What You Get

Keep the design crisp
Long runs need a clip every 30 cm - these prevent sagging and keep your shape (logo, swirl, lettering) exact.
Peel-and-stick install
Just peel the adhesive backing and press for 3 seconds. No screws, no holes, no drilling.
Heat + UV resistant
Won't crack in summer heat or yellow under sunlight. Designed for permanent placement.
Lightweight but strong
Tougher than metal clips of the same size - won't bend or break when the neon rope tugs.
Compatible with all Neon 2 models
Works with H61D3, H61D4, and H61D5. Same fit across the range.

A Closer Look

Govee Neon Rope Light Clips

Govee Neon Rope Light Clips

Easy Installation

Easy Installation

Works With

Govee Neon Rope Light 2 series
Works

What's in the Box

Mounting clips (quantity per pack - check listing)
Pre-applied adhesive backing

Delivery & Pickup

Standard Delivery
All Lebanon governorates - Greater Beirut usually next day; Tripoli, Jbeil, Saida, Tyre, Zahle, Akkar and the rest within 2–4 working days.
4 $ · Free over 50 $
Express Delivery
Faster shipping, available across all Lebanon. Your exact delivery date depends on your town - you will see it at checkout.
6 $ flat
Pickup - Dekwaneh
Collect from our Dekwaneh store. Weekdays 10am–5pm, Sat 10am–1pm.
3 $ · Free over 30 $

Warranty & Support

6-month Local Warranty
Covers defects in materials & workmanship. Handled here in Lebanon.
WhatsApp Support - Always On
Can't set it up? Message us. We reply within minutes, not days.
14-day Exchange - Unopened Items
The item must be unopened and in its original packaging. Exchange it for a product of equal or higher value - we do not give cash refunds. Opened items are covered by the warranty if there is a factory defect.
Free Setup Call
If you get stuck, we'll walk you through the setup on a free WhatsApp call.

Frequently Asked Questions

Will these clips work with my Govee Neon Rope Light? ›
Yes - specifically designed for Govee Neon Rope Light 2 models H61D3, H61D4, and H61D5. They also fit the original Neon Rope Light 5 m (H61A0).
Do I need tools to install? ›
No - peel the adhesive backing, press the clip onto a clean dry surface for 3 seconds, snap the neon rope into place. Done.
How many clips do I need? ›
Rule of thumb: one clip every 30 cm on a straight run, plus an extra clip at every corner or bend. A 5 m straight install needs about 16-18 clips. Bend-heavy designs (logos, letters) need more.
Will they hold up outdoors? ›
The clips themselves are durable, but the adhesive isn't designed for full outdoor exposure (UV, rain). For outdoor installs use the Govee Mounting Brackets for Neon Lights 2 instead - they screw in.
Will they leave marks when removed? ›
The adhesive can leave a slight residue on paint or wallpaper. To remove cleanly, warm the back with a hair dryer for 30 seconds, then peel slowly. Use rubbing alcohol on any leftover residue.
What if a clip breaks? ›
The plastic is rated tough, but if you twist a clip too hard during install it can crack. Just use one of the spares - most packs include extras.

Compare Models