Sonoff Zigbee Smart Roller Shutter Switch | MINI-ZBRBS

Sonoff MINI-ZBRBS – Zigbee Roller Shutter Switch

The Zigbee version of the popular MINI-RBS roller shutter controller. Wires into your existing curtain, shutter, or roller-door motor and lets you control it from your phone. Set exact position percentages, schedule open/close times, or trigger with voice.

Like all Zigbee devices, it has a hidden bonus: it acts as a Zigbee repeater, extending your mesh network range. Install one in each room with curtains, and you’re also strengthening signal for every other Zigbee sensor and switch in your house.

Zigbee vs Wi-Fi version: which to pick

• Pick this Zigbee version if: you already have a Sonoff Zigbee Bridge Pro or NSPanel Pro, your home has many Zigbee devices, or you want offline reliability.
• Pick the Wi-Fi MINI-RBS if: you don’t have a hub yet and don’t want to buy one, or you only need this one controller.

Key Features

• Percentage position control – set to any exact position from 0% to 100%, not just open/closed.
• Automatic motor calibration on first run.
• Zigbee repeater – extends your mesh network range for other devices.
• Works offline – local automations run through the hub without internet.
• Schedules + scenes via the eWeLink app.
• Compact – fits inside standard Lebanese wall back-boxes.
• Voice control via Google Assistant or Alexa through the hub.
• Requires a Sonoff Zigbee Bridge Pro or NSPanel Pro to function.

💡 Pro Tip: If you have curtains or shutters in multiple rooms, install a MINI-ZBRBS in each one – they all act as Zigbee repeaters between each other. The more you install, the stronger your whole Zigbee mesh becomes, especially in larger Lebanese houses where signal struggles to reach the far rooms.

⭐ Frequently Asked Questions

Does it need a hub?

Yes – the MINI-ZBRBS is Zigbee, not Wi-Fi. You need either a Sonoff Zigbee Bridge Pro or an NSPanel Pro (which has a Zigbee hub built in).

The switch sometimes disappears from the app – what’s happening?

This is an occasionally-reported issue with Zigbee devices. Most common cause: weak signal between the switch and the hub. Move the hub closer to the switch, or install another Zigbee device between them as a repeater. If it keeps happening, message us – we’ll help troubleshoot or replace under warranty.

Can the NSPanel Pro control it?

Yes – the NSPanel Pro has a Zigbee hub built in, so the MINI-ZBRBS pairs directly to it without needing a separate Bridge Pro.

What’s the difference between this and the MINI-RBS (Wi-Fi version)?

Same physical product, different protocol. Wi-Fi version connects directly to your router (no hub needed) but loads up your Wi-Fi network. Zigbee version needs a hub but adds to a mesh that’s more reliable for many devices.

Is this the newest model for roller shutters?

Yes – the MINI-ZBRBS is Sonoff’s newest dedicated Zigbee roller-shutter switch.

Can I order multiple at once?

Yes – order as many as you have curtains/shutters. Each handles one motor.

Can I use it for a water heater or heater instead?

No – this is specifically designed for shutter/curtain motors with up/down logic. For a heater or resistive load, use the Sonoff Basic Gen5 instead.

What’s the difference between MINI-ZBRBS and Dual R3?

Different products. The Dual R3 has 2 channels for controlling 2 separate circuits (e.g. 2 lights). The MINI-ZBRBS is specifically wired for one curtain/shutter motor with up/down position logic.