How It Works

1
Turn off the breaker
Cut power to the circuit. Use a wire tester to confirm before touching any wire.
2
Strip the wire
Strip about 10 mm of insulation off each wire end. Clean cut, no frayed strands.
3
Lift the lever, insert, close
Open the lever on the connector, push the wire fully in, then close the lever firmly. Repeat for each wire entering that junction.
4
Tuck and close the box
Fold the connected wires back into the box, screw the switch or module back in. Restore power and test.
5.0 from 553 verified Google & Facebook reviews — real orders across Lebanon Read reviews

Is This Right for Me?

Wire range: 0.08–4.0 mm² (hard or soft wire)
Max current: 32A
Tool needed: Just a wire stripper
Mechanism: Push-in spring lock
Material: Fire-resistant polycarbonate
Best for: Smart-switch installs, junction boxes, panel work
Reusable: Lift the lever to release and reuse

Product Details

Sonoff Quick Wire Connectors

Push-in wire connectors that make electrical connections fast and secure. No levers needed — just strip the wire and push it in. The connector locks it in place automatically. Made from fire-proof, corrosion-resistant material.

Key Features:

  • Push-In Design: Strip the wire, push it in — it locks automatically.
  • Fire-Proof Material: Rated for high temperatures and long-lasting use.
  • Compact Size: Takes up less space than traditional connectors.
  • Multiple Sizes: Available for different numbers of wires.

💡 Pro Tip: These are ideal for tight spaces like behind-the-switch installations. When you’re installing a MINIR4 or ZBMINIL2 in a small wall box, these compact connectors save precious space.

What You Get

10x faster than electrical tape
Strip the wire, push it in, done. No tape, no twisting, no heat-shrink. Each junction takes seconds instead of minutes.
Fits crammed back-boxes
Smart switches like the MINIR4 leave very little space for wire joins. The compact connector body solves the geometry.
Fire-resistant housing
Self-extinguishing polycarbonate body. Safer than wrapped tape in tight box installs.
Holds 32A safely
Up to 32A — covers anything you'd safely run through a residential circuit. Same connectors as professional electricians use.
No special tools
Cable strippers and these connectors are all you need. No crimping tool, no soldering iron.

Common Use Cases (1)

Real scenarios Lebanese customers use this product for. Don't see yours? Message us and we'll tell you if it fits.

Cable Connect
connect your switchboard cables cleanly and safely using Sonoff connectors.
See 3 products

Works With

Universal — works with any residential wiring
Works
Especially useful for Sonoff MINIR4 / ZBMINIL2 / ZBMINIR2 installs
Works
Lebanese 220V single-phase systems
Works

What's in the Box

1× pack of Sonoff Quick Wire Connectors

Delivery & Pickup

Standard Delivery
All Lebanon governorates — Greater Beirut usually next day; Tripoli, Jbeil, Saida, Tyre, Zahle, Akkar and the rest within 2–4 working days.
$4 · Free over $50
Express Delivery
Faster shipping — usually within 24 hours of order confirmation (Greater Beirut & Metn). Same-day not guaranteed.
$6 flat
Pickup — Dekwaneh
Collect from our Dekwaneh store. Weekdays 10am–5pm, Sat 10am–1pm.
$3 · Free over $30

Warranty & Support

6-month Local Warranty
Covers defects in materials & workmanship. Handled here in Lebanon.
WhatsApp Support — Always On
Can't set it up? Message us. We reply within minutes, not days.
14-day Exchange
Exchange within 14-day for a product of equal or higher value. No refunds.
Free Setup Help
Every order includes a setup guide — plus a free WhatsApp call if you ever need a hand.

Frequently Asked Questions

Will they work with the wire sizes I have at home (1.5, 2, 2.5 mm²)? ›
Yes — the range is 0.08 to 4.0 mm² for both hard and soft wires. Everything between 1.5 and 2.5 mm² is fully supported.
Can they carry 32A? ›
Yes — rated up to 32A. Covers most residential circuits including water heater and AC feeds.
Do I need an electrician? ›
Not strictly — the push-in design is DIY-friendly. But anytime you're working inside mains wiring, turn off the breaker first and check with a tester. If you're not confident, an electrician will use these too — they're a professional-grade connector.
Will they work with Lebanese 220V mains? ›
Yes — they're rated for standard residential mains, including Lebanese 220V single-phase.
What if one breaks? ›
They're warranty-covered. In practice they don't break under normal use — the wire and lever are simple, durable parts.
Are these the same as Wago connectors? ›
Same family — push-in lever-operated connectors. Sonoff's are a similar standard, designed to work cleanly with Sonoff smart switch installs.
Reusable? ›
Yes — lift the lever, pull the wire out, reuse the connector elsewhere. Useful if you change your mind on a wiring layout.

Compare Models